maspack.render

Interface IsSelectable

All Superinterfaces:

IsRenderable

All Known Subinterfaces:

Dragger3d, DrawTool, MultiViewer.SimpleSelectable, Renderable, RenderableComponent, RenderablePoint

All Known Implementing Classes:

AjlCollisionTest, ArticulatedBeamBody, ArticulatedDemo, ArticulatedFem, AttachDemo, AttachedBeamBody, AttachedBeamDemo, AuxMaterialBundle, AuxMaterialBundleList, AuxMaterialElementDesc, AuxMaterialElementDescList, AxialSpring, AxialSpringList, BallPlateCollide, BeamBody, BeamBodyCollide, BlockTest, BlockTestX, BodyConnector, CollisionBehavior, CollisionHandler, CollisionManager, ColorBar, ColoredFemBeam3d, ColoredMeshDemo, ColoredSphereTest, CompliantConstraintDemo, ConnectorBoundsRenderer, ConnectorForceRenderer, ConstrainedParticle, ConstrainedTranslator3d, ConstrainerBase, ControllerBase, ControllerMonitorBase, ConvexPolygon2d, CoupledSolveDemo, CutPlaneProbe, CylinderWrapping, DeformableBody, DeformedJointedCollide, DicomLoader, DicomPlaneViewer, DicomTest, DicomViewer, DistanceGrid, DoubleArmDemo, Dragger3dBase, DragToolBase, DrawModeTest, DrawToolBase, DynamicComponentBase, EditableMeshComp, EditableMeshTest, EditablePolygonalMeshComp, EllipsoidWrapTest, EmbeddedSurface, FaceComponent, FaceList, FallingSkull, Fem3dBlock, FemBeam, FemBeam3d, FemBeamColored, FemBeamMech, FemBeamTest, FemBeamWithBlock, FemBeamWithFemSphere, FemBeamWithMuscle, FemCollision, FemCollisions, FemDisplayProbe, FemElement, FemElement3d, FemElement3dList, FemEmbeddedSphere, FemFrictionBeam, FemMarker, FemMeshBase, FemMeshComp, FemModel, FemModel3d, FemModelDeformer, FemModelFrame, FemMuscleArm, FemMuscleBeams, FemMuscleDemo, FemMuscleHeart, FemMuscleModel, FemNode, FemNode3d, FemPlaneCollide, FemSkinDemo, FemSurfaceTargetDemo, FemSurfaceTargetDemo.SurfaceTargetController, FemWithBeamBody, FishDemo, FixedMeshBody, ForceTarget, ForceTargetDemo, Frame, FrameBodyAttachment, FrameFem3dConstraint, FrameFemAttachment, FrameMarker, FrameSpring, FrameSpringDemo, FreehandTool, FullPlanarJoint, FullPlanarJointDemo, GenericMarker, GridPlane, Hello, Hex3dBlock, HexBeam3d, HexElement, HexFrame, HexIncompress, HudPrintStream, HydrostatDemo, HydrostatInvDemo, HydrostatModel, ImagePlaneProbe, InstancedRenderingTest, IntersectionTester, IsRenderableHolder, Jack3d, JointBase, JointedCollide, JointedFemBeams, LaymanBowl, LaymanDemo, LaymanModel, LinearAuxiliaryTest, LinearPointConstraint, LockingDemo, LumbarFrameSpring, LumbarSpringDemo, MappingDemo, MappingDemo.DrawMappings, MappingTest, Marker, MassSpringDemo, MechModel, MechModelCollide, MechModelDemo, MechSystemBase, MeshBase, MeshBodyTest, MeshComponent, MeshComponentList, MeshEditTest, MeshIntersectingProbe, MeshTestBase, MeshThicken.Region, MFreeElement3d, MFreeElement3dList, MFreeMeshComp, MFreeModel3d, MFreeMuscleModel, MFreeNode3d, MonitorBase, MultiMuscleDemo, MultiPointMuscle, MultiPointMuscleVia, MultiPointSpring, MultiPointSpringList, MultiSpringDemo, MultiSpringTest, MultiViewerTesterBase.SimpleSelectableBase, Muscle, MuscleArm, MuscleBundle, MuscleBundleList, MuscleElementDesc, MuscleElementDescList, NetDemo, NetDemo, NetDemoWithPan, NetDemoWithRefs, NURBSCurve2d, NURBSCurve3d, NURBSCurveBase, NURBSMesh, NURBSObject, NURBSSurface, Particle, ParticleAttachment, ParticleConstraint, ParticleConstraintBase, ParticleConstraintNdBase, ParticleLineConstraint, ParticleMeshConstraint, ParticlePlaneConstraint, ParticleSpring, PenetrationRender, PenetrationRenderer, PenetrationRendererDemo, PlanarConnector, PlanarConnectorDemo, PlanarPoint, PlaneConstrainedFem, Point, PointFemAttachment, PointForce, PointForceDemo, PointList, PointMesh, PointMeshTest, PointModel, PointModel1d, PointModel2d, PointModel3d, PointSpringBase, PointSpringList, PointToPointMuscle, PointTracingProbe, Polygon2d, PolygonalMesh, PolygonalMeshTest, PolylineMesh, PolylineMeshTest, PressureShell, PullController, PuppetDemo, PyramidBeam3d, PyramidElement, QuadFishDemo, QuadhexBeam3d, QuadhexElement, QuadpyramidBeam3d, QuadpyramidElement, QuadraticLockingDemo, QuadtetBeam3d, QuadtetElement, QuadwedgeBeam3d, QuadwedgeElement, RenderableBase, RenderableComponentBase, RenderableComponentList, RenderableCompositeBase, RenderableModelBase, RenderableModelBaseOld, RevoluteJoint, RigidBody, RigidBodyCollision, RigidBodyDemo, RigidBodyJoint, RigidBodySpring, RigidCompositeBody, RigidCompositeCollide, RigidCylinder, RigidEllipsoid, RigidMesh, RigidMeshComp, RigidSphere, RigidTorus, RobustCube, RollPitchJoint, RollPitchJointDemo, RootModel, RotatableScaler3d, Rotator3d, Scaler3d, SDGridTest, SegmentedPlanarConnector, SegmentedPlaneDemo, SelfCollision, SignedDistanceGrid, SimpleCollide, SimpleMuscle, SimpleMuscleWithController, SimpleMuscleWithPanel, SimpleMuscleWithProbes, SimpleMuscleWithProbes2, SimpleMuscleWithProperties, SinCosMonitorProbe, SingleHex, SinglePyramid, SingleQuadhex, SingleQuadpyramid, SingleQuadtet, SingleQuadwedge, SingleTet, SingleWedge, SkinDemo, SkinMeshBase, SkinMeshBody, SkullParticles, SlottedRevoluteJoint, SoftPlaneCollider, SolidJoint, SpecularTest, SphericalJoint, SphericalJointBase, SphericalJointDemo, SphericalRpyJoint, SphericalTextureMapping, SpinControlProbe, SplineTool, SpongeDemo, SpongeModel, SpringMeshDemo, TargetFrame, TargetPoint, TetBeam3d, TetElement, TextComponent2d, TextComponent3d, TextComponentBase, TextLabeller3d, TextTest, TorusDemo, TorusWrapTest, TracingProbe, TrackingController, Translator3d, Transrotator3d, TransverseIsotropy, TransverseIsotropyTest, TubeDemo, TwoStrandWrapBase, VectorTracingProbe, VertexComponent, VertexList, ViscousBeam, WedgeBeam3d, WedgeElement

public interface IsSelectable
extends IsRenderable

Field Summary

Fields inherited from interface maspack.render.IsRenderable

TRANSPARENT, TWO_DIMENSIONAL

Method Summary

Modifier and Type	Method and Description
void	getSelection(java.util.LinkedList<java.lang.Object> list, int qid) Append to list the component (or components) associated with the qid-th selection query issued by this component's render method.
boolean	isSelectable() Returns true if this object is in fact selectable.
int	numSelectionQueriesNeeded() If this selectable manages its own selection (by issuing selection queries within its render method), then this method should return the maximum number of selection queries that will be required.

Methods inherited from interface maspack.render.IsRenderable

getRenderHints, prerender, render, updateBounds

Method Detail

isSelectable

boolean isSelectable()

Returns true if this object is in fact selectable.

Returns:

true if this object is selectable

numSelectionQueriesNeeded

int numSelectionQueriesNeeded()

If this selectable manages its own selection (by issuing selection queries within its render method), then this method should return the maximum number of selection queries that will be required. Otherwise, this method should return -1.

Returns:

maximum number of selection queries needed by this component, or -1 if this component does not manage its own selection.

getSelection

void getSelection(java.util.LinkedList<java.lang.Object> list,
                  int qid)

Append to list the component (or components) associated with the qid-th selection query issued by this component's render method. This will only be called if this component manages its own selection (i.e., the number nums returned by numSelectionQueriesNeeded() is positive), and qid will in turn be a number between 0 and nums-1.

Parameters:

list - selected objects are appended to the end of this list

qid - index of the selection query